Minor mechanical
GreenCosmetic or external
The unit works electrically, or the fault is purely physical and external. No electronics work is needed, only basic tools and a standard functional test afterwards.
From baseband units to microwave links, we fix down to the board and component — lowering cost per repair and extending the life of equipment the OEM may no longer support.
We diagnose and repair down to the component level — not just module replacement.
One repair partner across all major RAN and transmission vendors.
Systematic fault isolation identifies the true root cause, not just the symptom.
Rigorous NFF screening avoids unnecessary repairs and repeat returns.
We repair equipment the OEM no longer supports, extending your asset lifecycle.
Firmware/software upgrades and cosmetic refurbishment return units to field-ready condition.
From a loose screw to the recycling line. Each category is set by where the fault sits and what it takes to fix it, not by how bad the unit looks.
Each category is set by where the fault sits and what it takes to fix it, not by how bad the unit looks.
| Category | Where the fault is | Who fixes it | Test after repair | Where it goes next |
|---|---|---|---|---|
1. Minor mechanical Green | Outside the electronics: chassis, panels, latches, filters | Repair technician, basic tools | Power-on and functional test | Back to stock or client |
2. Module replacement Yellow | A self-contained replaceable part, or firmware | Repair technician with parts stock | Functional and configuration check | Back to stock or client |
3. Major repair Orange | Main board, RF or power circuits | Specialist board-level technician | Calibration and full performance test | Back to stock or client |
4. Beyond economical repair Red | Repairing costs more than swapping in another used unit | Assessment, then a PCB swap or unit swap if the customer approves the quote | None if retired; full performance test after a swap | Back to service after an approved swap, otherwise parts harvesting or certified recycling |
Effort, skill and parts cost rise with each category. Once repairing costs more than swapping in another used unit, the unit is beyond economical repair.
What each one covers, the faults you'll typically see, and where the unit goes afterwards.
Cosmetic or external
The unit works electrically, or the fault is purely physical and external. No electronics work is needed, only basic tools and a standard functional test afterwards.
Sub-assembly or field-replaceable unit
The fault sits in a self-contained, replaceable part that can be swapped without touching the main board. It needs parts stock and a functional and configuration check, but no soldering.
Board-level or component-level
The fault is on the main PCB or in RF and power circuitry. It takes skilled technicians and specialist equipment such as rework stations, X-ray and RF test benches, and usually calibration and full performance testing afterwards.
BER
Repairing the unit would cost more than swapping it for another used unit of the same type. Units that can't be restored at all fall here too.
Options to get a working unit back. We can propose a full PCB swap, replacing the damaged main board with a known-good board, or a unit swap, replacing the faulty unit with another tested used unit of the same type. Either way, we quote you first and only carry out the work once you approve the quote. Swapped units go through configuration and full performance testing before they're returned.
Three questions, asked in order, put every unit in exactly one category.
Is the fault only physical or external, with the electronics working?
Yes → 1. Minor mechanicalCan a replaceable module, part or firmware reflash fix it?
Yes → 2. Module replacementIs board-level repair possible, and cheaper than a used replacement unit?
Yes → 3. Major repairEvery repair results in a documented report — fault found, root cause, parts replaced, and test results — making sure that every repair is a learning-point for the next repair.
Repairs are backed by a warranty. If a fault recurs within the warranty period, we re-repair or replace at no cost.
Repair typically costs a fraction of buying new equipment.
Keep equipment in service well beyond OEM end-of-support.
Fast turnaround and advance replacement keep networks on air.
Send us your part list for a free capability check and quote — we'll confirm what we can repair and how fast.